Yes. Track & Roller Co. repairs sliding glass doors in Kensington and Talmadge, San Diego (ZIP 92116). The original homes here date from 1910 through the early 1950s, so the patio door is almost always an addition: a 1960s or 1970s aluminum slider cut into the back of a Spanish Revival or Craftsman house, or a 1990s vinyl door from a kitchen remodel. The jobs we get called for most here are 1960s to 1980s aluminum doors, roller replacement, track repair and stainless track caps and adjustment and realignment. New rollers run from $249 a door here, the same as anywhere in the county, and the number is fixed before the visit.
Sliding door repair in Kensington and Talmadge
1960s to 1980s Aluminum Doors
Steel wheels rusted solid or worn flat, dragging on the track instead of rolling
From $249Learn more →Roller Replacement
Two new tandem steel ball-bearing rollers matched to your door, parts and labor
From $249Learn more →Track Repair and Stainless Track Caps
Stainless steel track cap fitted over the existing aluminum rail, cut to length on site
From $199Learn more →Adjustment and Realignment
Door put back on the track and both rollers reset so the panel sits level
From $129Learn more →Homes and sliding doors in Kensington and Talmadge
The original homes here date from 1910 through the early 1950s, so the patio door is almost always an addition: a 1960s or 1970s aluminum slider cut into the back of a Spanish Revival or Craftsman house, or a 1990s vinyl door from a kitchen remodel. The aluminum ones ride steel rollers on bare aluminum track that has worn through, and the openings were often framed by a handyman, so the jambs are rarely square. Talmadge has more 1940s and 1950s houses with mid-century aluminum sliders on canyon-rim lots. Expect a roller swap, a stainless track cap and an adjustment to square up the lock, not a replacement.
Getting to you in Kensington and Talmadge
Kensington is bounded by I-8 on the north and I-15 on the west, with Talmadge across Fairmount Avenue to the east. We come in from I-15 at the Adams Avenue exit or from I-8 at Fairmount Avenue, then work the streets off Adams Avenue, Marlborough Avenue and Monroe Avenue. The Kensington sign over Adams Avenue and the Kensington-Normal Heights Library are the landmarks people give us, and the Talmadge entry gates and old street lamps mark the east side. From central San Diego it is about 10 to 15 minutes, and we pair these jobs with Normal Heights and North Park.
Landmarks we work near
- Kensington-Normal Heights Library
- The Kensington sign over Adams Avenue
- Talmadge entry gates and street lamps
- Adams Avenue
Kensington and Talmadge ZIP code
92116
Ready to fix the slider in Kensington and Talmadge?
One visit, parts on the truck, the price you were quoted.
What your Kensington and Talmadge appointment looks like
-
Call, text or send the form
Tell us your Kensington and Talmadge address, how many doors and what each one is doing. A photo of the door gets you a firm price right away.
-
We come to you
The truck carries tandem rollers, stainless rollers, track caps, handle sets and screen rollers for most doors, so one visit finishes the job.
-
Panel out, parts in, door re-hung
We clean the track, fit the parts, re-hang the panel and set the rollers and keeper. About an hour per door.
-
You run the door
You slide and lock the door yourself before we pack up. Payment is on completion.
Kensington and Talmadge questions
The slider on my 1920s Kensington house was added decades ago and the opening is not square. Can you still fix it?
Usually, yes. Added doors in older homes were often framed into an opening that has settled since, so the panel binds at one corner. We replace the worn rollers, then use the adjustment screws at the bottom corners to set the panel height so it runs parallel to the track and the lock hook meets the keeper. If the jamb is badly out of plumb we tell you what a carpenter needs to do first.
Does historic designation in Kensington affect replacing rollers or a handle?
No. Roller, track cap, lock and handle work is interior hardware and does not change the exterior of the house. A home that is individually designated as historic may need city review before visible exterior changes, which can include swapping the whole door unit for something that looks different. Repairing the existing door avoids that question entirely.
My Talmadge canyon-rim door is a 1960s aluminum slider. Is it worth repairing or should I replace it?
If the glass is intact and the frame is straight, repair it. New tandem steel rollers and a stainless track cap over the worn aluminum track bring a 1960s slider back to a one-hand slide for far less than a replacement door, and you keep the original look. Replace when the frame is bent, the glass is single-pane and you want insulation, or the opening itself needs rebuilding.
More answers on the FAQ page, full rates on pricing, or contact us with a photo of the door.
Nearby areas we also serve
Helpful guides for Kensington and Talmadge homeowners and landlords
- Signs Your Sliding Door Needs New Rollers (And Two-Minute Checks)
- What Does Sliding Door Roller Replacement Cost in San Diego?
- Repair or Replace Your Sliding Glass Door? An Honest Decision Guide
Ready to book in Kensington and Talmadge?
Call or text for a straight answer and a price before we come out. Mon to Sat 7am to 6pm.